Behringer HBE Dynamic
The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life.
By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing.
.
Options
Automatic feed control system for automatic set-up of speed and feed rate according to input of material grade and width of material. The deflection of the saw blade is continuously monitored while machine is cutting. Two deviation thresholds are preset by the saw operator. If the first threshold is exceeded the down feed is reduced in several steps. The control resets the feed step by step to the initial value as soon as the deviation is reduced. If the first threshold is unvaried or displayed for a longer time the machine switches off after finishing the cut. If the second threshold is reached the machine switches off immediately.
Specifications
- Cutting range 90° round:
- Cutting range 90° flat:
- Min dimension, round:
- Min dimension, flat:
- Feeding length single stroke:
- Drive power:
- Blade speed:
- Saw blade dimensions:
- Rest piece length in automatic operation:
- Total power:
- Saw feed:
- Material feed:
- Material clamping:
- Saw blade cleaning:
- Length:
- Width:
- Height:
- Weight:
- Material support height:
- 260 mm
- 300 x 260 mm
- 10 mm
- 10 x 8 mm
- 650 mm
- 2.6 kW
- 15 - 110 m/min
- 4440 x 34 x 1.1 mm
- 70 mm
- 3.7 kW
- hydraulic
- ball screw
- hydraulic
- electrical chip brush
- 1850 mm
- 2300 mm
- 1820 mm
- 1850 kg
- 800 mm
- 320 mm
- 350 x 320 mm
- 10 mm
- 10 x 8 mm
- 650 mm
- 2.6 kW
- 15 - 110 m/min
- 4440 x 34 x 1.1 mm
- 70 mm
- 3.7 kW
- hydraulic
- ball screw
- hydraulic
- electrical chip brush
- 1850 mm
- 2300 mm
- 1820 mm
- 1900 kg
- 800 mm
- 410 mm
- 510 x 410 mm
- 10 mm
- 10 x 8 mm
- 650 mm
- 2.6 kW
- 15 - 110 m/min
- 4440 x 34 x 1.1 mm
- 70 mm
- 3.7 kW
- hydraulic
- ball screw
- hydraulic
- electrical chip brush
- 2000 mm
- 2850 mm
- 2220 mm
- 3200 kg
- 800 mm
- 510 mm
- 510 x 510 mm
- 10 mm
- 10 x 8 mm
- 650 mm
- 2.6 kW
- 15 - 110 m/min
- 4440 x 34 x 1.1 mm
- 70 mm
- 3.7 kW
- hydraulic
- ball screw
- hydraulic
- electrical chip brush
- 2000 mm
- 2850 mm
- 2220 mm
- 3500 kg
- 800 mm