FORSTNER EASY
This is a coil processing machine which could cut a coil metal to different lengths sheets. The cutting could be provided with roller shear (EASY CUT model) or with guillotine shear (EASY PRO model). Machine with guillotine shear is able to cut up to 1,5 mm steel, with roller shear – up to 1,0 mm. Possible coils widths: 1250 mm or 1500 mm
Machine is equipped with infeed roller guide. The infeed guide roller is angled to match the loop of the coil from a decoiler. This helps prevent creasing on soft materials like copper, aluminum and zinc. The table guide has four roller bearings (two on each side) to guide the metal in the pinch rolls. The roller bearings allow the metal to move easily forward and backwards without damaging the edges. This also keeps the material straight as the material is fed into the machine helping to ensure a square cut.
Machine is equipped with SPS-S1 Control touch screen with intuitive features, that allow you to enter different quantities and lengths. The control uses the Electronic Eye to automatically set the zero point on square material. The control features a “material savings” mode which automatically stops the machine, raise the slitting knives automatically and then moves forward to cut the piece to length, while leaving a clean edge. An optional radio remote can be purchased when adding later on a powered decoiler or recoiler, so the operator has everything under control.
Options
The film applicator can basically be mounted on any table. Using the deflection rollers and the fully rubberized feed rollers, the protective film is pressed on almost bubble and wrinkle-free. The device has an additional arm with tension spring for tensioning the film during the return movement. This design is only applicable for single decoiling systems. The option is supplied with fully rubberized pinch rollers.
Cut to length line will be prepared for retrofitting a film applicator at any time and with ease.
The coil guide is an important component for the function and accuracy of every system. The table has a fixed and a manually adjustable coil guide with ball bearings. The adjustment of the movable coil guide is done by a hand wheel. This specific table has rollers integrated in the table to ensure a smooth surface.
For external start of the next order.
The possibility to increase the machine working speed to 35 m / min or 45 m / min. The standard speed is 25 m / min.
Specifications
- Working width:
- Shear type:
- Shearing capacity, steel:
- Shearing capacity, stainless steel:
- Shearing capacity, aluminium:
- 1250 mm
- Roller shear
- 1,0 mm
- 0,6 mm
- 1,2 mm
- 1500 mm
- Roller shear
- 1,0 mm
- 0,6 mm
- 1,2 mm
- 1250 mm
- Guillotine shear
- 1,5 mm
- 1,0 mm
- 1,8 mm
- 1500 mm
- Guillotine shear
- 1,5 mm
- 1,0 mm
- 1,8 mm