FORSTNER POWER COMPACT
This is a powerful coil processing machine with following functions: straightening, slitting and cutting. Straightening rolls are automatically adjustable, slitting knives – manually. For cutting there is a guillotine shear at the end of machine. Possible coil widths: 1250 mm or 1500 mm. Machine with working width 1250 could cut up to 2 mm thickness steel.
Machine has automatically adjustable straightening. Straightening unit consist of 6 straightening rollers with diameter 110 mm.
Slitting unit consist of 5 pairs of manually adjustable slitting knives with shafts Ø 140 mm. Maximum quantity of slitting knives is 7. The slitting capacity depends on quantity of slitting knives.
The F3 – Control has a variable speed setting and 20 programm lines. The operator can program the material, the length, the straightening setting and the number of parts to be cut. Due to the motorised raising and lowering of the slitting blades, there is no waste at the end of the job. All drives, motors and encoders are from the reliable Siemens brand. Simple icon display makes operation easy for all languages. Another feature of the F3 – Control of the POWER COMPACT PRO is the fully automatic straightening. The operator specifies the straightening value in the material table, the remaining calculation and control of the straightening shafts is done by the control system.
Options
The film applicator can basically be mounted on any table. Using the deflection rollers and the fully rubberized feed rollers, the protective film is pressed on almost bubble and wrinkle-free. The device has an additional arm with tension spring for tensioning the film during the return movement. This design is only applicable for single decoiling systems. The option is supplied with fully rubberized pinch rollers.
Cut to length line will be prepared for retrofitting a film applicator at any time and with ease.
The coil guide is an important component for the function and accuracy of every system. The table has a fixed and a manually adjustable coil guide with ball bearings. The adjustment of the movable coil guide is done by a hand wheel. This specific table has rollers integrated in the table to ensure a smooth surface.
When you need to slit narrow strips or when doing a trim cut, we can offer you the right solution. Use our stripper rings that are perfectly suiting our slitting shafts to ensure even better slitting results.
For external start of the next order.
The possibility to increase the machine working speed to 35 m / min or 45 m / min. The standard speed is 25 m / min.
Specifications
- Working width:
- Straightening rolls:
- Straightening rolls diameter:
- Slitting capacity, steel:
- Slitting capacity, stainless steel:
- Slitting capacity, aluminium:
- Slitting shaft diameter:
- Slitting knives:
- Speed:
- Shear type:
- 1250 mm
- 6
- 110 mm
- 2,0 mm
- 1,5 mm
- 2,5 mm
- 140 mm
- 5
- 25 m / min
- Guillotine shear
- 1500 mm
- 6
- 110 mm
- 1,7 mm
- 1,3 mm
- 2,0 mm
- 140 mm
- 5
- 25 m / min
- Guillotine shear